Manual 3-Function Hospital Bed for Hospital Procurement Projects

When purchasing manual hospital beds for a new hospital, ward renovation or medical equipment distribution project, buyers need to compare more than product appearance and unit price. Adjustment functions, braking configuration, side rail structure and bed mobility all influence whether a model meets the project's requirements.

The SYC-B-06 Manual 3-Function Hospital Bed combines backrest adjustment, leg section adjustment and overall bed height adjustment in one manually operated hospital bed. It is also equipped with four-section ABS side rails, a central braking system and four corner bumper wheels.

For hospitals and medical equipment distributors seeking a manual bed with adjustable height and upgraded mobility features, the SYC-B-06 provides a clearly defined configuration for technical evaluation and purchasing discussions.

Three Manual Functions That Buyers Should Confirm

Manual Backrest Adjustment

The backrest can be raised or lowered manually to provide different upper-body positions during patient rest and routine care.

This function allows nursing staff to adjust the patient's position without an electric actuator or control handset.

Manual Leg Section Adjustment

The adjustable leg section provides additional lower-body positioning options for patients during hospital stays.

Caregivers can change the leg section position according to the patient's needs and the facility's nursing procedures.

Manual Overall Bed Height Adjustment

The third function is overall bed height adjustment, which allows the patient platform to be raised or lowered manually.

This feature is particularly relevant when procurement specifications require a height-adjustable manual hospital bed rather than a fixed-height model.

For purchasing teams, it is important to confirm that the third function refers to overall bed height adjustment and not another positioning function.

Why Overall Height Adjustment Matters in Hospital Bed Procurement

Manual hospital beds are available in different configurations. Some provide backrest and leg adjustment while maintaining a fixed overall height.

The SYC-B-06 includes an additional height adjustment function, allowing caregivers to change the working level of the patient platform.

For hospitals comparing different manual bed models, this distinction should be clearly identified in technical specifications and quotations.

When preparing a procurement comparison, buyers should also request the minimum and maximum bed height measurements to confirm compatibility with the intended clinical environment.

Central Braking System for Hospital Bed Mobility

Central Brake Configuration

The SYC-B-06 is equipped with a central braking system for controlling bed movement and securing the bed in a stationary position.

This configuration is an important purchasing consideration because hospital beds may be supplied with different braking arrangements, including individual caster brakes and centrally operated systems.

Practical for Hospital Ward Operations

Hospital beds may need to be moved during cleaning, room arrangement or patient care activities.

After the bed has been positioned, the central braking system allows staff to secure it before stationary use.

For procurement teams, the braking configuration should be checked together with the caster specifications and the hospital's mobility requirements.

Four-Section ABS Side Rails

Split Side Rail Design

The SYC-B-06 features four ABS side rail sections, with two sections arranged along each side of the bed.

This design differs from conventional manual hospital beds equipped with a single full-length side rail on each side.

The raised side rails provide lateral protection, while the split arrangement allows caregivers to access different sections of the patient platform when the rails are lowered.

Side Rail Configuration for Hospital Projects

For hospital furniture procurement, the number and type of side rails should be clearly stated in the product specification.

The SYC-B-06 uses four-section ABS side rails. Buyers should also confirm the required rail dimensions, operating mechanism and applicable safety requirements when preparing project specifications.

Four Corner Bumper Wheels

Protection during Hospital Bed Movement

Four bumper wheels are installed at the corners of the SYC-B-06 hospital bed.

These corner-mounted bumpers help reduce direct contact between the bed structure and surrounding objects when the bed is moved near walls, bedside furniture or other medical equipment.

For hospitals purchasing beds in larger quantities, corner protection is a practical configuration to consider alongside the braking system and main casters.

ABS Head and Foot Boards with Color Customization

The SYC-B-06 is equipped with ABS head and foot boards.

Standard blue, wood-grain finishes and other color options are available. Custom colors can also be provided according to customer requirements.

For hospital projects and medical equipment distributors, this allows the bed appearance to be coordinated with institutional preferences or purchasing requirements.

Color selection is an optional configuration and does not change the three manual adjustment functions of the bed.

Manual Operation for Hospital Equipment Planning

No Electrical Power Required for Bed Adjustment

The backrest, leg section and overall bed height are adjusted manually.

These functions do not require an electrical power connection, electric motor or electronic handset.

For hospitals that use a combination of manual and electric beds, the SYC-B-06 can be considered for departments where manual adjustment meets the intended patient care requirements.

Evaluate Operation alongside Care Requirements

Although manual operation eliminates the need for electrical power during adjustment, procurement teams should also consider the frequency of repositioning and the physical effort required from nursing staff.

For departments requiring frequent powered adjustments, an electric hospital bed may be more appropriate.

What Should Importers Check before Ordering the SYC-B-06?

1. Confirm the Three Adjustment Functions

The SYC-B-06 provides manual backrest adjustment, manual leg section adjustment and manual overall bed height adjustment.

These functions should be stated clearly in the purchasing specification to avoid confusion with other three-function bed configurations.

2. Verify the Bed Dimensions

Request the overall dimensions, patient platform dimensions and applicable mattress size before confirming the order.

These measurements are important for hospital room planning, mattress compatibility and transportation calculations.

3. Confirm the Height Adjustment Range

Although the SYC-B-06 includes overall bed height adjustment, the exact minimum and maximum heights should be confirmed against the project's technical requirements.

4. Review Backrest and Leg Adjustment Angles

Different hospital projects may specify particular adjustment ranges.

Buyers should verify the backrest and leg section adjustment angles using the manufacturer's confirmed technical specifications.

5. Check the Central Braking System

The model is equipped with central braking. The detailed caster dimensions and brake operation should be confirmed where these are specified in the purchasing documents.

6. Confirm the Four-Section ABS Side Rails

The SYC-B-06 includes four ABS side rail sections. Buyers should confirm the rail configuration and any project-specific safety requirements.

7. Review Corner Protection

Four corner bumper wheels are included in the configuration. Their positioning and compatibility with the intended hospital environment should be reviewed during technical evaluation.

8. Confirm Packing and Shipping Information

For international orders, buyers should request packing dimensions, gross weight, net weight and loading quantities before finalizing shipping arrangements.

Technical Specifications

Model: SYC-B-06

Product Name: Manual 3-Function Hospital Bed

Operation: Manual

Number of Functions: Three

Backrest Adjustment: Manual

Leg Section Adjustment: Manual

Overall Bed Height Adjustment: Manual

Side Rails: Four-section ABS side rails

Braking System: Central braking system

Corner Protection: Four corner bumper wheels

Head and Foot Boards: ABS

Color Options: Standard blue, wood-grain and other customizable colors

Electrical Power for Adjustment: Not required

Primary Application: Hospital wards and professional healthcare facilities

Suitable for Hospital Furniture Procurement and Distribution

General Hospital Bed Purchasing

The SYC-B-06 can be evaluated for hospital wards requiring three manual adjustment functions, central braking and four-section ABS side rails.

New Hospital and Ward Furnishing Projects

For projects involving multiple patient rooms, buyers can assess the SYC-B-06 according to bed dimensions, adjustment requirements, braking configuration and side rail specifications.

Medical Equipment Importers and Distributors

Medical equipment distributors can include the SYC-B-06 in their manual hospital bed range for customers requiring an adjustable-height model with central braking.

OEM and ODM Purchasing Requirements

Customizable ABS head and foot board colors are available for different customer preferences.

For other OEM/ODM requirements, buyers should confirm the proposed specifications and customization scope before placing an order.

Manual Hospital Bed Supply for International Buyers

For international procurement, a successful hospital bed order depends on matching the product configuration to the buyer's technical requirements.

The SYC-B-06 combines manual backrest adjustment, leg section adjustment and overall height adjustment with four-section ABS side rails, central braking and corner bumper protection.

These features provide a practical starting point for importers and hospital procurement teams comparing manual three-function bed models.

Explore our Hospital Bed collection for additional hospital bed models and configurations.

For bedside furniture and related medical equipment, browse our Hospital Bed Accessories range.

For bulk purchasing, technical specifications, distributor inquiries or OEM/ODM projects, contact us with your product requirements and expected order quantity.